The main characteristics of Dwyer Dewell RMA flowmeter

The main characteristics of Dwyer Dewell RMA flowmeter

The Rate Master @ direct reading precision flowmeter combines various unique advantages and is reasonably priced, making it suitable for general needs.

Easy to read design – Direct reading scale lines eliminate the hassle of conversion. The scale lines are printed on the aluminum plate and covered with epoxy resin on the surface. The indicator tube is marked with scale lines on both sides. The special overall flow guide groove can prevent the float from being damaged or drifting in the event of interference. Against a white background, the float is clearly visible.

Structure ensures accuracy – All Rate Master @ flow meters are made of sturdy, transparent, and shatterproof polycarbonate plastic injection molded around precision manufactured conical tubes. This makes it highly accurate and has good repeatability. The integrated plastic body is fixed on the stainless steel back plate, and its pipe threads are welded to absorb the torque of the pipeline. In addition, brass or stainless steel (BV or SSV specified when ordering) precision metering valves can also be selected for precise flow adjustment. When using vacuum, the top valve (TMV) can be selected for RMA type. The small RMA series can be precise to ± 4% of the full range; The RMB series can be precise to ± 3%; The large RMC series can be precise to ± 2%.

Easy installation – The Rate Master @ flow meter can be installed on the panel using the connector holes on the main body, and the flow meter can pass through the panel neatly, keeping the center of the flow tube at the same level. When installing through the panel, the diagonal angle can automatically fix the instrument in the appropriate position on the panel, and the surface mounting part can also be fixed through pipeline installation. We will provide all installation components and installation operation instructions.

The universal main body – Rate Master @ flowmeter main body can be easily interchanged. When exchanging, simply remove the main body from the back plate and seal it with another O-ring at the inlet and outlet, without affecting the pipeline. In laboratories or factories, interchangeability is very useful and convenient when the required range of measurement is different.

Easy to clean – simply loosen the four screws to remove the plastic body of the flow meter from the stainless steel back plate, without affecting the connection of the pipe threads. Open the sliding cover and plug, clean the flow pipe with water and soap, and then reinstall it. It’s that simple.