Wika pressure gauge model 113.13

Wika pressure gauge model 113.13

Bourdon tube pressure gauge, made of copper alloy material

Liquid filled, plastic shell

application

Measurable measuring points with high dynamic pressure loads or vibrations

Suitable for gas and liquid media that are not high viscosity, not easy to crystallize, and do not corrode copper alloy components

Hydraulic device

compressor

Functional characteristics

Resistance to vibration and impact

Design in accordance with EN 837-1 standard or ASME B40.100

NS 40 [1] ½ “], 50 [2″], 63 [2 ” ½ ]

Range: Up to 0 40 MPa [0… 6000 psi]

describe

113.13 is a liquid filled mechanical pressure gauge with a plastic casing.

Liquid filling can effectively reduce the vibration and impact on internal components.

Therefore, this pressure gauge is suitable for machinery or factories with strong vibrations.

The 113.13 pressure gauge is measured through the deformation of the Bourdon tube, which is transmitted through pressure and displayed on the dial.

This plastic shell and cover are welded together and sealed with an O-ring, so they can withstand the protection requirements of IP65.

The conventional dial size of the 113.13 pressure gauge is 40 [1] ½ “], 50 [2″], and 63 [2 ” ½ [], with an accuracy of 2.5, can be widely used in industrial fields, and can be optionally equipped with mounting brackets. It can also be installed through back brackets to meet panel installation needs. [63] ½ The conventional table of [] can be installed on the back or through the front edge, which is generally only suitable for front only installation.