Dwyer pressure gauge 1227 series

Dwyer pressure gauge 1227 series

Dual scale Flex Tube ® U-shaped inclined pressure gauge

1227 Series Dual Scale Flex Tube ® The U-shaped tilt pressure gauge can read a large range of differential pressure directly on the right side, or a small range of differential pressure directly at the bottom after tilting. Simply tilt the differential pressure gauge until the liquid level reaches zero. No horizontal bubble is required to calibrate the levelness, and a magnetic clamp is used to fix the differential pressure gauge on the surface of the metal pipeline.

This is a widely used differential pressure gauge with a low price. It has two reading ranges: as a U-tube differential pressure gauge, it can measure 0 to 16 inches of water column, and as an inclined differential pressure gauge, it can measure -0.20-0-2.6 inches of water column. The range reading of the 1227M (metric) model is 0 to 400 mm water column and -5-0-70 mm water column. The operating instructions are printed directly around the scale.

Attachment:

A-101-1 oz dispenser bottle red measuring liquid,. 826 sp. Gram.

A-102-4 oz bottle of red measuring solution,. 826 sp. Gram.

A-103-1 bottle of red measuring solution,. 826 sp. Gram.

A-104-1 quart of red measuring liquid,. 826 sp. Gram.

1227-CC – Vinyl carrying case for 1227 pressure gauge.

A-356- Polyethylene plug with fixing ring, polyethylene plastic, used for 1/4 “inner diameter pipes, slip ring on outer diameter of pipes, and plug for sealing.

A-319- Flexible red PVC connector, 3/16 “ID rubber tube to 1/4” inner diameter plastic tube, suitable for pressure gauges 12211222 and 1227.

A-344- Wiring conduit, brass, 1/4 “diameter, 8” long.

A-339- Adapter, brass, 1/8 “NPT to 3/16” rubber, and 1/8 “inner diameter plastic pipe.

A-220- Easy to inspect transparent flexible vinyl tubing, making it most suitable for testing applications where there is a possibility of fluid entering the pipeline. 3/16 “inner diameter x 5/16” outer diameter, with a length of 500 ‘; The maximum pressure is 45 psi @ 73 ° F.

A-357- Thermometer and wiring pipe bracket, stainless steel wire.

Two magnetic components are required for the A-364-1222 pressure gauge (three for 1222-36 and M-1000)

Dwyer压力计1227系列
双刻度Flex-Tube® U型倾斜压力计 
1227系列 双刻度Flex-Tube® U型倾斜压力计 能够在右侧直读大范围的差压，或者倾斜后在底部直读微小范围的差压。只需简单的倾斜差压计直到液位为零。不需水平泡来校准水平度，带有磁性卡件将差压计固定在金属管道表面。
这是一款用途广泛的差压计，并且价格低。它有两个量程读数范围：作为U型管差压计，它能测量0 到16英寸水柱，作为倾斜式差压计，它能测量-0.20 – 0 – 2.6英寸水柱。1227M（公制）型的量程读数为0 到 400 mm水柱和-5 – 0 – 70 mm水柱。操作说明直接印制在刻度周围。
附件：
A-101  –  1盎司分配器瓶红色测量液，.826 sp。克。
A-102  –  4盎司瓶红色测量液，.826 sp。克。
A-103  –  1瓶红色测量液，.826 sp。克。
A-104  –  1夸脱的红色测量液，.826 sp。克。
1227-CC  – 用于1227压力计的乙烯基手提箱。
A-356  – 带固定环的聚乙烯塞，聚乙烯塑料，用于1/4“内径管，管道外径上的滑环和用于密封的插塞。
A-319  – 柔性红色PVC连接器，3/16“ID橡胶管至1/4”内径塑料管，适用于1221,1222和1227压力表。
A-344  – 接线管，黄铜，直径1/4“，长8”。
A-339  – 适配器，黄铜，1/8“NPT至3/16”橡胶和1/8“内径塑料管。
A-220  – 易于检查透明柔性乙烯基管，因此最适用于存在流体进入管道的可能性的测试应用。 3/16“内径x 5/16”外径，长度为500′;最大压力为45 psi @ 73°F。
A-357  – 温度计和接线管支架，不锈钢丝。
A-364  –  1222压力表的磁铁组件，需要2个（1222-36和M-1000需要3个）。