E+H pressure instrument,

E+H pressure instrument,  E+H flow instrument,  E+H level instrument

》E+H radar level instrument:

1. E+H radar level instrument: non-contact measurement. Suitable for various harsh working conditions (such as toxic and highly corrosive), and external measurements that are not affected by changes in the physical properties of the measured medium. The models include: FMR230, FMR231, FMR240, FMR244, FMR245, FMR250, FMR530, FMR531, FMR532, and FMR533.

2. E+H guided wave radar level instrument: contact measurement. It is independent of changes in the physical properties of the tested medium. Temperature resistance up to 150 degrees, pressure resistance up to 40 bar. The models include FMP40, FMP41C, and FMP45.

3. E+H ultrasonic level meter: non-contact measurement. Suitable for various liquids and solids, including corrosive media and variable dielectric constant media. Temperature resistance up to 150 degrees, pressure resistance up to 3 bar. The models include: FMU230/231, FDU91, FDU92, FDU93, FDU95, FDU96, FMU40/41, FMU42, and FMU43. FMU860/FMU861/FMU862, FDU80/FDU81/FDU82 * *.

4. E+H liquid tuning fork switch: No calibration and maintenance required. Suitable for all liquids, as well as bonding, stirring, and media containing bubbles, regardless of the dielectric constant of the measured medium. Temperature resistance up to 150 degrees, pressure resistance up to 64 bars. Models include: FTL50, FTL51, FTL51C, FTL50H, FTL51H, FTL70, FTL71.FTL20, FTL260.

5. E+H solid tuning fork switch: No calibration and maintenance required. Suitable for particles and dust with a diameter less than 10mm, with a temperature resistance of up to 150 degrees and a pressure resistance of up to 16 bar.

The models include: FTM50, FTM51, FTM52, FTM30/31/32 (D/S), FTM20/21, FTM260

6. E+H static pressure level meter: intelligent pressure sensor, applicable to liquid, slurry and mud, independent of foam and dielectric constant. The temperature resistance can reach up to 100 degrees, and the pressure resistance can reach 4 bar. The models include: DB50, DB50L, DB51, DB52, DB53, FMX167, FMX165, FTC51, FTC52, FTC53.

7. E+H capacitive level meter and switch: suitable for various liquids, as well as corrosive and bonding media. Temperature resistance up to 400 readings and pressure resistance up to 500 bar.

The models include: FMI51, FMI52, FTC 51/52/53, FTC470Z/471Z, FTC968/968Z, DC 11, FTC 260/262.

8. E+H resistance rotary level switch: contact level switch. One of the low-cost limit measurement methods, suitable for both powdered and granular media. Temperature resistance up to 80 degrees, pressure resistance up to+0.8 bar. The models include: FTE30/31.

9. E+H heavy hammer level gauge: sturdy structure. Especially suitable for high containers (up to 70m), unaffected by dust. Temperature resistance up to 150 degrees, pressure resistance up to 2 bar.

The models include: FMM50.

》E+H flow meter:

1. E+H electromagnetic flowmeter: provides high-precision measurement with high range ratio. Can be used in strict hygiene settings and provide safety certification suitable for hazardous situations.

The models include DTI200, 50W/53W, 50P/53P, 50H/53H, 10W, 10H, and 10P.

2. E+H vortex flowmeter: used to measure the flow rates of gases, vapors, and liquids. Low installation cost, low pressure loss, long-term stability, and wide dynamic measurement range.

The models include: 72F/72W.

3. E+H thermal mass flowmeter: used to measure the flow rate of gases, with simple operation, no pressure loss, and a wide dynamic measurement range. The models include: 80/83F * *.

4. E+H ultrasonic flowmeter: external installation, non-contact measurement. Easy to install, does not interfere with the process, suitable for corrosive media, high pressure, and sanitary environments. The models include: 90/93W/93P * *.

》E+H pressure instrument

1. E+H pressure transmitters: PMC131, PMP131, PTP31/35/PTC31, PMC41, PMC45, PMP41, PMP45, PMP46, PMP48.

2. E+H intelligent pressure transmitter: PMC71, PMP71, PMP72, PMP75.

3. E+H intelligent differential pressure transmitter: PMD70, PMD75, PMD76, PMD77, PMD78.

》E+H analyzer 1. E+H pH/redox analyzer: various pH glass electric sensors. Probe: CPS11/12/13, CPS41/42/43, CPS71/72, CPF81/82, CPF201, CPS471/471D; Transmitters: CPM153, CM42, CPM223/253.

2. E+H residual chlorine analyzer: Sensors and transmitters can measure residual chlorine and chlorine dioxide content. Probe: CCS140/141, CCS240/241, CCS120; Transmitters: CCM223/253.

3. E+H conductivity analyzer: The measurement system is suitable for measuring the conductivity and concentration within all ranges of pure water, acid or alkali solutions. Transmitters: CLM153, CM42, CLD134, CLM223/253; Probe: CLS12, CLS15, CLS16, CLS19, CLS21, CLS50, CLS52, CLS54.

4. E+H turbidity and solid suspension concentration measuring instrument: probe: CUS31/CUS31W, CUS41/CUS41W; Transmitters: CUM223/253.

5. E+H turbidity analyzer: CUE21/CUE22, CUE23/CUE24, CUE25/CUE26.

6. E+H online dissolved oxygen measuring instrument: probes: COS41, COS71, COS21D, COS31; Transmitters: COM223/253.

7. E+H layered interface and sludge level measuring instrument: CUC101.

8. E+H online water agricultural production system substance content analyzer: CSM750/CSS70.

9. E+H ultrasonic mud level measuring instrument: CUS70/CUM750.

10. E+H online ion concentration analyzer (ammonia nitrogen phosphorus, etc.): CA71AM, CA71PH.

》E+H temperature instrument

1. E+H temperature sensor: includes a thermistor probe pt100 and a thermocouple probe. The models include: TR10/12/13, TC10/12/13, TR44/45, TST410/414, TMR31, TMR35, TTR31/35, TR62, TC62, TR88, TMT162R/C

2. E+H temperature transmitter: models include: TMT180, TMT181, TMT182, TMT184, TMT187, TMT188, TMT121, TMT122, TMT142, TMT162