WIKA pressure gauge PGT23.063

WIKA pressure gauge PGT23.063

Bourdon tube pressure gauge with charged signal output

Suitable for process industry, safety, NS 63

application

Collect and display process values

Transfer process values to the control room, with a transmission signal of 4 20 mA

Local analog display, easy to read and no power required

Security applications

Functional characteristics

Plug and play, no configuration required

Measurement range: 0 1000 bar or 0 15000 psi

Easy to read analog display, standard size 63mm

Safe type with solid barrier wall (Solidfront), designed to meet the requirements of EN 837-1 and ASME B40.100

Patents and property rights, such as US 8030990, DE 112007000980, CN 101438333

describe

PGT23.063 intelliGAUGE ® Type can be used to display process pressure on site under limited space conditions, while transmitting signals to the central control center or remote center.

By combining mechanical measurement systems with precise electronic signal processing, process pressure can be safely read even in the event of a power outage.

The pressure gauges produced by WIKA company comply with EN 837-1 and ASME B40.100 standards. This safety type pressure gauge consists of a non cracking window, a sturdy baffle wall between the measuring system and the dial, and an explosion-proof backplate. In the event of a malfunction, the operator’s front end is protected as the medium or components can only be discharged from the back of the case

The fully welded and durable Bourdon tube measurement system can generate pointer rotation proportional to pressure. The electronic angle encoder, which has been validated in automotive applications with strict safety requirements, determines the position of the pointer shaft – it is a non-contact sensor, therefore completely free of wear and friction. This generates an electrical output signal proportional to pressure (4… 20 mA).

The WIKA electronic sensor integrated into high-quality pressure gauges combines the advantages of electrical signal transmission with the advantages of local mechanical display.

The measurement range (electrical output signal) can be automatically set according to the mechanical display, that is, the displayed full range and 4 Corresponding to the 20 mA output signal.

WIKA 压力表 PGT23.063
带电信号输出的波登管压力表
适合过程工业，安全性，NS 63

应用

• 采集并显示过程值
• 传送过程值至控制室，传送信号为4 … 20 mA
• 本地模拟显示，易于读取且无需电源
• 安全应用

功能特性

• “即插即用”，无需配置
• 测量范围：0 … 1,000 bar 或 0 … 15,000 psi
• 易于读取的模拟显示，标准尺寸为63mm
• 安全型，带实心挡板壁（Solidfront），设计符合 EN 837-1 和 ASME B40.100 的要求
• 专利和产权，例如 US 8030990、DE 112007000980、CN 101438333

描述