WIKA differential pressure gauge DPGS43.100, DPGS43.160

WIKA differential pressure gauge DPGS43.100, DPGS43.160

Differential pressure gauge for live contact switches

Suitable for process industry, all metal dielectric cavity

application

Control and adjust process values

Monitor equipment and control circuit on/off

Suitable for measuring points with high overvoltage

Monitoring filters and pumps

Liquid level measurement inside sealed tanks

Functional characteristics

Differential pressure measurement range: 0… 1.6 kPa

High working pressure (static pressure), overpressure safety protection up to 4 MPa

Can provide a liquid filled housing, suitable for high dynamic pressure loads and high vibration environments

Provide instruments with inductive electrical contacts for use in hazardous areas

Provide instruments with switch electrical contacts, suitable for PLC applications

describe

In any case, if you want to perform on/off operations on the circuit while displaying process pressure locally, the DPGS43.1×0 pressure gauge from the switchGAUGE series will be an ideal choice.

The switch electrical contact (electronic electrical contact for alarm) can connect and disconnect the electrical control circuit according to the pointer position of the instrument. The switch electrical contacts are adjustable within the full range (see DIN 16085). Usually, electrical contacts are installed under the dial, with only a few installed above the dial. The instrument pointer (actual value pointer) can rotate freely throughout the entire range, regardless of the setting.

The pointer can be adjusted through the detachable adjustment keys inside the window.

The switch electrical contact not only includes multiple electrical contacts, but can also set a single set value. When the actual value pointer exceeds or falls below the set value, the electrical contact will switch.

This model of pressure gauge is manufactured according to the DIN 16085 standard and meets all relevant standards (such as EN 837-3) and safety requirements of specifications. It is fully capable of measuring the working pressure of high-pressure vessels on site.

The switch electrical contacts include magnetic assisted electrical contacts, dry spring resistance chain electrical contacts, induction electrical contacts, and electronic electrical contacts. Induction type electrical contacts can be applied in hazardous areas. Electronic and dry spring resistance chain electrical contacts can be used to trigger PLCs.

WIKA 差压表 DPGS43.100, DPGS43.160
带电接点开关的差压表
适合过程工业，全金属介质腔

应用

• 控制和调节过程值
• 监控设备并控制电路通断
• 适用于过压较高的测量点
• 监测过滤器和泵
• 密封罐内的液位测量

功能特性

• 差压测量范围：0 … 1.6 kPa
• 高工作压力（静压），过压安全保护高达4 MPa
• 可提供可充液外壳，适用于高动态压力负载和高振动环境
• 提供带感应式电接点的仪表，用于危险区域
• 提供带开关电接点的仪表，适合PLC应用

描述