Forney 福尼 DURAFire 油点火器
是市场上唯一的“保护一次燃烧区”设计。因此,这种点火器是自稳定的、高度可靠的,几乎不需要维护。雾化发生在点火器的后部,远离尖端的热量,不会产生污垢或需要清洁。大多数应用不需要点火器缩回,从而降低了安装成本和持续维护。
The DURAFire air atomized No. 2 oil igniter features the only “protected primary combustion zone” design on the market. As a result this igniter is self-stabilized, highly reliable and requires virtually no maintenance. Atomization takes place at the rear of the igniter away from the heat of the tip resulting in no fouling or need for cleaning. Most applications require no igniter retraction reducing installation costs and ongoing maintenance.
Specifications
Fuel: |
No. 2 oil |
Capacity Rating*: |
6-33 MBtu/hr (1.76-9.67 MW) |
Atomization Media: |
Air |
Fuel Pressure: |
60 psig (4.22 kg/cm2) at igniter |
Atomizing Air: |
Pressure: 80 psig (5.62 kg/cm2) at igniter
Flow: 0.40 lb air/1 lb fuel |
Cooling / Combustion Air: |
Flow: 60 SCFM (at igniter)
Pressure Drop: Approximately 3 in. (76.2mm ) WC across device
Connection: 1½ inch NPT female |
Length:
|
Available in 2 inch (50.8mm) increments from 24 to 180 inches (609 to 4572 mm) |
Guide Tube Outside Diameter: |
4”(101.6 mm) – igniter can be installed in an existing mount tube for a 4” (101.6 mm) diameter device |
Mount Tube Outside Diameter: |
4.5” (114.3 mm) |
Construction Material: |
Guide Tube and Mount Tube – Carbon Steel
Furnace End of Guide Tube – 304 Stainless Steel
Oil Tip Assembly – 304 Stainless Steel |
Retraction Assembly |
Per Customer Requirements |
Oil Tip Assembly |
Narrow or Wide angle, as required |
NFPA |
Class 1, 2 or 3 |
云联技术 支持询价 报价njxj888@163.com